Manual Parking Controls

Warden Swing Barrier

Our manual swing barriers or warden barriers are constructed from 60 x 60mm Square Hollow Section (SHS) with anti tamper hinges and is padlockable in the open or closed position. 

Enquire about this product

Get a quote for this productSpecify Us

installation-by-jacksons-250-250We provide nationwide installation for all of our security fencing, gates, and acoustic barriers. Installation is carried out by our experienced gangs who have extensive knowledge of our products and install to our premium standards. Let us know if you require installation when you make an enquiry using our product quote form or by calling us.

Warden Swing Barrier Features

  • Manual operation
  • Galvanised to BS EN 1461
  • 3.0-9.0m (18.0m double)
  • Anti Tamper hinges
  • Provision for high security padlock 
  • Supplied with hinge post and 2 catch posts
  • Option of stop or no entry signs available
  • Hold open posts recommended for locking in open postition

Product page logo banner no sbd

Warden Swing Barrier Specification

Single swing barrier 3m - 8m

80 x 60mm slam post - over length or base plated
100 x 100mm hanging post - over length or base plated

Single swing barrier 8.1m - 9m

80 x 60mm slam post - over length or base plated
150 x 150mm hanging post - over length or base plated

Double swing barrier 5.5m - 12m

80 x 60mm slam post (x2) - over length or base plated
100 x 100mm hanging post (x2) - over length or base plated

Double swing barrier 12.2m - 18m

80 x 60mm slam post (x2) - over length or base plated
150 x 150mm hanging post (x2) - over length or base plated

Heavy Duty Swing Barrier Specification

Single swing barrier 3m - 5m

100 x 100mm slam post - over length or base plated
150 x 150mm hanging post - over length or base plated

Single swing barrier 5.1m - 8m

100 x 100mm slam post - over length base plated
150 x 150mm hanging post - over length or base plated

Post Options

  • Over length set in concrete as standard
  • Base plated to bolt down onto concrete
  • Standard Finishes
  • Hot dip galvanised to BS EN 1461 as standard
  • Hot dip galvanised and powder coated to BS EN 13438 in one of our standard colours at extra cost
  • Powder coating to non standard BS or RAL to special order
  • Marine coating for applications near sea water (optional extra)
  • Explore our finishes below

    Finishes

    Standard Colours
  • Black RAL 9005
  • Green RAL 6005
  • Grey RAL 7012
  • Blue BS 20-C-40
  • Blue RAL 5010
  • Red RAL 3020
  • Yellow RAL 1018
  • Brown RAL 8017
  • White RAL 9010
  • Other colours are available on request

  • Standard powder coating colours:

    RAL colours steel fencing

    Top